What are the steps to print my CAD file on the F400?

by Site Admin | Feb 16, 2017

The workflow for printing with a F400 is very simple.

  1. Export your CAD file to your hard drive in .STL or .OBJ format
  2. Open that file using the supplied Simplify3D slicer software
  3. In Simplify3D, import your file and align it on the print bed to the optimal placement (usually to minimize the amount of support structures)
  4. In Simplify3D, select the F400 Printer Material Profile for the material you wish to print
  5. Select ‘Prepare to print’ and save the file to your hard drive
  6. Copy that file onto your F400, either onto the SD card or via web browser to the F400’s onboard storage
  7. Prepare the print bed with adhesive
  8. Load your filament into the printer
  9. From the printer control panel or web interface, start your print

Attend A Live, Online Demo

Each week we host live, online webinars to demonstrate the capabilities and features of the F410 3D printer.

Over 1 hour, we take you through the entire process of printing a part, and with 2 way audio, ask questions along the way.

Thanks for responding! Please look for an invitation via email shortly.