FAQ: What adhesive is used when operating the F410 3D printer?

For the Fusion3 EDGE:
When printing on Glass, depending on the material, , we strongly recommend that customers use Avery purple glue stick.
– Applied to a clean, dry bed
– Applied in alternating directions, only needed in the area that you are printing
– Using the suggested number of layers found on the certified materials list for each material

Some exceptions may include Polycarbonate for which you may find that either Glue Stick or Magigoo PC formula may be better for your particular application.

When using a unique magnetic print surface with EDGE, that print surface may require a special adhesive or release agent to keep parts from adhering. Please refer to the Certified Materials List for guidance or in the case of certain ‘expert surfaces’ such as Build-Tak, PEI and others, the instructions or other manufacturers guidance (as Fusion3 is not able to provide support and does not warranty these surfaces during use).

For the Fusion3 F306, F400 and F410, we strongly recommend that customers use Avery purple glue stick
– Applied to a clean, dry bed
– Applied in alternating directions, only needed in the area that you are printing
– Using the suggested number of layers found on the certified materials list for each material

We have tested a myriad of different options and found that this is the best solution, universal for all materials printable on our 3D printer, readily available and inexpensive. Several tubes are included with your printer.

If you are having unique issues with esoteric or large parts warping or not staying on the bed, we may suggest a unique formulation of Magigoo which may solve your issue.