FUSION3 EDGE 3D PRINTER:
PRICE AND SPECIFICATIONS
ORIGIN |
|
| Place of Manufacture: |
Greensboro, North Carolina, USA |
PHYSICAL DIMENSIONS & WEIGHT |
|
| Dimensions (DxWxH): | 657 x 720 x 640 mm
(25.9 x 28.3 x 25.2 in) |
| Weight: | 38.56 kg (65 lb) |
PRINT SIZE & VOLUME |
|
| Max Print Size (LxWxH): | 368 x 368 x 343 mm (14.5 x 14.5 x 13.5 in) |
| Max Build Volume: | 1.64 cubic feet |
PRINTING |
|
| Print Technology : | Fused Filament Fabrication (FFF) |
| Max Print Speed: | 250 mm/sec |
| Max Travel Speed: | 500 mm/sec |
| Motion System |
Fusion3’s Patented ‘F-Series’ motion control system, updated with high-performance linear rails on all axes and 2GT belt CoreXY |
| Extruder / Feeder Type: | Bowden drive / Geared feeder |
| Filament Monitoring: |
Yes, detects if a jam or run out, with dynamic timeout adjustment for printing materials that run at slower speeds |
ENCLOSURE & PRINT SURFACE |
|
| Ambient Operating Temperature: | 7oC – 29oC . 45oF to 85oF |
| Enclosure Temperature: | 70oC max |
| Print Surface: | 1/4″ Alumnium toolplate with glass and mutizone heater, optional 1/4″ magnetic toolplate surface for use with glass and multiple optional print surfaces, including BuildTak, Garolite, Kapton, PEI, and Polypropolyne |
| Maximum Bed Temp: | 140oC |
| Bed Leveling: | Automatic, cable driven probe type with self-calibrating probe offset |
MATERIALS |
|
| Diameter: | 1.75 mm |
| Types: | All major printable plastics (See certified materials list) |
| Spool Handling: | Adjustable, Spool Roller |
| Max Spool Size: | Up to 12” diameter, 6” width, Note: customer must ensure that weight, orientation, and motion of spool does not create drag which will impact performance of extruder. |
PRICE & SHIPPING |
|
| EDGE 3D Printer: | Please Contact for a Quote |
| Shipping (USA & Can): | via LTL Freight |
| International Shipping: | via Air Freight |
| Shipping Cost: | Varies based on location, please contact for quote |
AVAILABLE OPTIONS |
|
| EDGE Heavy-Duty Rolling Cart: | $800 |
| ANVIL Print Head: |
$125 |
| Set of ANVIL Replacement Print Tubes (.4MM, .6MM or .8MM) | $50 |
| Set, 3 Glass Print Beds: | $50 |
| Replacement Filter Set: | $49 |
| EDGE Stack Light (visual status) |
$90 |
| Filament Bay Dehumidifier |
$120 |
| Magnetic Print Bed (print with glass and optional magnetic surfaces) |
$300 |
| Reusable Sheet Steel Print Surface (for Magnetic Print Bed) |
TBD |
| Various Print Surfaces (requires Reusable Sheet Steel Print Surface) |
TBD |
| Binder EDS 115 Lab Oven (for Humidity Free Filament Storage) |
$1620 |
| Additional REACTOR Software License | $150 |
| 1500VA UPS Basic Backup – Power Conditioning & 7-15 minutes of power |
$449 |
| 1000VA UPS Smart Backup Controller – Power Conditioning, 7-15 minutes of power, control multiple daisy chain batteries |
$699 |
| Daisy Chainable Battery (each) – provides up to 50 minutes run time (requires Smart Backup Controller) |
$699 |
SOFTWARE |
|
| Processing Software: | Fusion3 REACTOR. 1 License, installable on up to 2 eligible PCs. $150 each additional seat ($115 for EDU). |
| Operating Systems: | Windows |
| File Types: | .STL, .OBJ |
PRINT HEADS / PERFORMANCE |
.4MM |
.6MM |
.8MM |
| Print Head: | Fusion3 ANVIL | Fusion3 ANVIL | Fusion3 ANVIL |
| Layer Height (Min – Max): | 20 – 300 microns | 100 – 400 microns | 200 – 500 microns |
| Min Feature Size: | .5 mm2 | .75 mm2 | 1.0 mm2 |
| Feature Tolerance: | 0-6″ +/-.005 | 6″+ +/-.010 | 0-6″ +/-.005 | 6″+ +/-.010 | 0-6″ +/-.005 | 6″+ +/-.010 |
| Print Nozzle (Tube): |
.4 mm surgical steel, wear resistant, replaceable tube |
.6 mm surgical steel, wear resistant, replaceable tube |
.8 mm surgical steel, wear resistant, replaceable tube |
| Maximum Melt Temperature: | 320oC | 320oC | 320oC |
| Maximum Cubic Flow Rate: | 20 mm^3/sec | 36 mm^3/sec | 45 mm^3/sec |
ONBOARD CONTROLLER, STORAGE & NETWORKING |
|
| Screen: | 7″ full color touchscreen |
| Print Controller: | 32-bit, 120mhz ARM-Based controller |
| Interface Controller: | 64-bit, 1.4GHz ARM-Based controller |
| Storage: |
Standard Version: Onboard 32GB flash storage, external USB port Secure Version: Onboard 32GB flash storage, locked external USB port |
| Remote Management: | Intuitive user interface accessed via web browser over local network, giving full access to all functionality, password secured. |
| Network Connections: |
Standard Version: 2.4Ghz, 5Ghz WiFi, Bluetooth 4.2, Gigbit Ethernet Secure Version: Gigabit Ethernet Only |
ELECTRICAL & CERTIFICATIONS |
|
| AC Input: | 110V / 230V , 350W avg |
| Peak Power: | 6A / 3A, 600W |
| Certifications |
CE & FCC Certified, Power Supply UL Certified. |
WARRANTY & SUPPORT |
|
| Standard Warranty: | 2 Years, materials & workmanship (including printhead) |
| Technical Support: | FREE for life of 3D printer |