3D PRINTER COMPARISON:
FUSION3 EDGE VS. LULZBOT TAZ PRO / TAZ PRO S
In 2019, Lulzbot announced its Taz Pro, and then an update called the Taz Pro S in 2020, its largest open-source 3D printers targeted at commercial users.
As you’ll see in the comparison below, the USA made Fusion3 F410 is a much better choice than Lulzbot for business and education customers requiring a commercial-grade 3D printing solution.
As you’ll see in the comparison below, Fusion3 F410 has a number of advantages over the Lulzbot Taz Pro and Taz Pro S, including:
- Arrives fully assembled and calibrated
- Large build area
- Fully enclosed, heated print chamber for printing engineering-grade plastics
- The best warranty and support in 3D printing
Fusion3 EDGE 3D Printer
vs. Lulzbot Taz Pro / Taz Pro S
Note: Product details based on publicly available Information provided from each manufacturer’s website and/or marketing materials. All product names, logos, and brands are property of their respective owners. All company, product and service names used in this website are for identification purposes only.
||Lulzbot Taz Pro / Taz Pro S
|Maximum Build Volume||Single Extruder - 14.5" X 14.5" X 13.5"
1.64 cu ft
|11.02" X 11.02" X 11.22"
Taz Pro S = Single Extruders, Taz Pro = Dual Extruders
|Maximum Travel Speed||500 mm/s||not disclosed|
|Maximum Print Speed||250 mm/sec||200 mm/s|
|Minimum Layer Height||20 Microns||50 Microns|
|USB Serial or USB Flash Drive with Included 4gb Flash Drive|
|Max Melt Temp||320*C||290C|
|Heated Print Bed||
|Certified Materials||140+, including different types of: PLA, ABS,ASA, Flexible, Nylon, PETG, Nylon, HIPS, Acrylic,Carbon Fiber, Fiberglass, Polycarbonate. Unique settings created by Fusion3 for each material, 3D printer model and print head size, providing optimal performance.||Open filament system compatible with PLA, ABS, Nylon, Polycarbonate, Carbon Fiber Reinforced Blends, TPU 85A & 95A (Flexible), PETG, PETT, Copolyester, PVB (Polycast), PVA, HIPS, and many more 3rd party filaments.|
|Automatic Bed Leveling?||
Ultralight touch probe + mesh leveling
|Automatic Z-Axis Compensation|
|Enclosed Filament Storage||
Optional Filament Bay Dehumidifier Available
|Fully Assembled and Calibrated at Factory|
|Filament Monitoring and Detection|
|Prints Carbon Fiber and Other Reinforced Plastics 'Out of the Box'?||
Surgical steel print tubes resist wear
2x E3D Titan Aero Hardned Steel
|Print Head Size(s)||.4mm (standard), .6mm, .8mm||.5mm|
SAFETY & COMFORT
|Ability to Close Off Hot Surfaces from the Outside Environment|
|Shuts Off When Door Opened|
Optional Carbon & HEPA Filter
|Operating Sound Level||37.5 dBA (Closed), 42 dBA (Open)||not disclosed|