MAKERBOT METHOD X VS. fusion3 edge
(UPDATED 4/4/2022)
In 2018, Makerbot made the switch from being a consumer and education focused brand, to an attempt to service commercial customers, with the announcement of its China produced Makerbot Method 3D printer. The Method X is an update to the Method, but it is difficult to understand the differences between the two.
As you’ll see in the comparison below, the USA-made Fusion3 EDGE provides a broader set of features, a much larger print area, better performance, and the best warranty and support in 3D printing.
Fusion3 EDGE 3D Printer
vs. Makerbot Method X
Note: Product details based on publicly available Information provided from each manufacturer’s website and/or marketing materials. All product names, logos, and brands are property of their respective owners. All company, product and service names used in this website are for identification purposes only.
| PRODUCT | EDGE | MethodX |
|---|---|---|
| Fusion3 EDGE
|
Makerbot Method X
|
PRODUCT FEATURES
| Item | EDGE | Makerbot Method |
|---|---|---|
| Maximum Build Volume | Single Extruder – 14.5″ X 14.5″ X 13.5″ 1.64 cu ft |
Single Extrusion – 7.5″ X 7.5″ X 7.75″ Dual Extrusion – 6.0″ X 7.5″ X 7.75″ |
| Maximum Travel Speed | 500 mm/s | 500mm/s |
| Maximum Print Speed | 250 mm/sec | not disclosed |
| Minimum Layer Height | 20 Microns | 20 Microns |
| Network Connectivity |  Ethernet, WiFi, USB |
Ethernet, WiFi, USB |
| Max Melt Temp | 320*C | 300*C |
| Heated Print Bed | 145*C |
 |
| Certified Materials | 140+, including different types of: PLA, ABS,ASA, Flexible, Nylon, PETG, Nylon, HIPS, Acrylic,Carbon Fiber, Fiberglass, Polycarbonate. Unique settings created by Fusion3 for each material, 3D printer model and print head size, providing optimal performance. | ABS, ASA, PLA, Tough, PVA, SR-30, NYLON, PETG |
| Automatic Bed Leveling? | Ultralight touch probe + mesh leveling |
Automatic Z Calibration |
| Filament Diameter | 1.75mm | 1.75mm |
| Enclosed Filament Storage | Optional Filament Bay Dehumidifier Available |
Yes |
| Fully Assembled and Calibrated at Factory | |
Yes |
| Filament Monitoring and Detection | |
Yes |
| Prints Carbon Fiber and Other Reinforced Plastics ‘Out of the Box’? | Surgical steel print tubes resist wear |
|
| Print Head Size(s) | .4mm (standard), .6mm, .8mm | .4mm |
SAFETY & COMFORT
| Item | EDGE | COMPETITOR |
|---|---|---|
| Ability to Close Off Hot Surfaces from the Outside Environment | |
|
| Shuts Off When Door Opened | |
|
| Air Filtration | Optional Carbon & HEPA Filter |
|
| Operating Sound Level | 37.5 dBA (Closed), 42 dBA (Open) | not disclosed |
WARRANTY & SUPPORT
| Item | EDGE | COMPETITOR |
|---|---|---|
| Ability to Close Off Hot Surfaces from the Outside Environment | |
|
| Shuts Off When Door Opened | |
|
| Air Filtration | Optional Carbon & HEPA Filter |
|
| Operating Sound Level | 37.5 dBA (Closed), 42 dBA (Open) | not disclosed |