3D PRINTER COMPARISON:
FUSION3 EDGE VS. STRATASYS F370
Stratasys’ F123 line was seemingly introduced at the time to directly compete with the Fusion3 F400 and successor F410.
Previously, only Fusion3 used verbiage such as “affordable industrial-grade 3D printing” and an emphasis on accuracy, reliability, safety, and ease of use.
Frankly, we’re flattered that a company with a long history in 3D printing such as Stratasys, would take notice of our products.
The Stratasys F370 is the top end model for the company’s F123 line.
The F370 prints 8 materials with a price eight (8) time more than the Fusion3 EDGE, before you factor in the inflated cost of proprietary materials and extra service contracts.
Overall, the Fusion3 EDGE is a much better value than the Stratasys F370 and the entire F123 line of 3D printers, providing a wider range of printable materials, a larger build area at faster speeds, a longer warranty, and free lifetime technical support.
Fusion3 EDGE 3D Printer
vs. Stratasys F370
Note: Product details based on publicly available Information provided from each manufacturer’s website and/or marketing materials. All product names, logos, and brands are property of their respective owners. All company, product and service names used in this website are for identification purposes only.
|Maximum Build Volume||Single Extruder - 14.5" X 14.5" X 13.5"
1.64 cu ft
|Dual Extrusion - 14 x 10 x 14 in.|
|Maximum Travel Speed||500 mm/s||not disclosed|
|Maximum Print Speed||250 mm/sec||not disclosed|
|Minimum Layer Height||20 Microns||10 Microns|
WiFi, USB, & Ethernet
|Max Melt Temp||320*C||not disclosed|
|Heated Print Bed||
|Certified Materials||140+, including different types of: PLA, ABS,ASA, Flexible, Nylon, PETG, Nylon, HIPS, Acrylic,Carbon Fiber, Fiberglass, Polycarbonate. Unique settings created by Fusion3 for each material, 3D printer model and print head size, providing optimal performance.||PLA3 , ABS-ESD7, ABSM30, ABS-CF10, ASA, Diran 410MF073 , FDM TPU 92A, PC-ABS, QSR Support material|
|Automatic Bed Leveling?||
Ultralight touch probe + mesh leveling
Automatic Tip Offset Calibration
|Enclosed Filament Storage||
Optional Filament Bay Dehumidifier Available
|Fully Assembled and Calibrated at Factory|
|Filament Monitoring and Detection|
|Prints Carbon Fiber and Other Reinforced Plastics 'Out of the Box'?||
Surgical steel print tubes resist wear
|Print Head Size(s)||.4mm (standard), .6mm, .8mm||not disclosed|
SAFETY & COMFORT
|Ability to Close Off Hot Surfaces from the Outside Environment|
|Shuts Off When Door Opened|
Optional Carbon & HEPA Filter
|Operating Sound Level||37.5 dBA (Closed), 42 dBA (Open)||46 dBA closed|